Dispersive liquid–liquid microextraction based on amine‐functionalized Fe3O4 nanoparticles for the determination of phenolic acids in vegetable oils by high‐performance liquid chromatography with UV detection

A novel dispersive liquid–liquid microextraction method based on amine‐functionalized Fe₃O₄ magnetic nanoparticles was developed for the determination of six phenolic acids in vegetable oils by high‐performance liquid chromatography. Amine‐functionalized Fe₃O₄ was synthesized by a one‐pot solvothermal reaction between Fe₃O₄ and 1,6‐hexanediamine and characterized by transmission electron microscopy and Fourier transform infrared spectrophotometry. A trace amount of phosphate buffer solution (extractant) was adsorbed on bare Fe₃O₄‐NH₂ nanoparticles by hydrophilic interaction to form the “magnetic extractant”. Rapid extraction could be achieved while the “magnetic extractant” on amine‐functionalized Fe₃O₄ nanoparticles was dispersed in the sample solution by vortexing. After extraction, the “magnetic extractant” was collected by application of an external magnet. Some important parameters, such as pH and volume of extraction and desorption solvents, the extraction and desorption time needed were carefully investigated and optimized to achieve the best extraction efficiency. Under the optimal conditions, satisfactory extraction recoveries were obtained for the six phenolic acids in the range of 84.2–106.3%. Relative standard deviations for intra‐ and inter‐day precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied for the determination of six phenolic acids in eight kinds of vegetable oils.     

Determination of neuroprotective oxysterols in Calculus bovis,human gallstones,and traditional Chinese medicine preparations by liquid chromatography with mass spectrometry

So far, the components responsible for the neuroprotective effects of Calculus bovis are unclear. Cholesterol, one of the major components in Calculus bovis, is easily oxidized into oxysterols, which possess direct or indirect neuroprotective effects proved by our and others’ previous studies. Therefore, a liquid chromatography with mass spectrometry method coupled with ultrasonic extraction and solid‐phase extraction was developed for the determination of neuroprotective oxysterols in Calculus bovis, human gallstones, and traditional Chinese medicine preparations. Chromatographic separation was achieved on a C₁₈ column with isocratic elution at a flow rate of 1 mL/min. The established method showed good linearity (R² > 0.998), sensitivity with low limits of detection (0.06–0.39 μg/g), acceptable precisions (relative standard deviations ≤ 7.4%), stability (relative standard deviations ≤ 5.9%), and satisfactory accuracy (92.4–102.9%) for all analytes identified by different retention times, which could be applied for the determination of oxysterols. Five kinds of oxysterols proved to function as neuroprotectants were detected at different concentrations. Among them, 7β‐hydroxycholesterol and cholestane‐3β,5α,6β‐triol were rather abundant in the samples. It could be concluded that the potential neuroprotective components in Calculus bovis may be these oxysterols.     

Iron(III)‐Selective Chelation‐Enhanced Fluorescence Sensing for In Vivo Imaging Applications

A “turn‐on” pattern Fe³⁺‐selective fluorescent sensor was synthesized and characterized that showed high fluorescence discrimination of Fe³⁺ over Fe²⁺ and other tested ions. With a 62‐fold fluorescence enhancement towards Fe³⁺, the probe was employed to detect Fe³⁺ in vivo in HeLa cells and Caenorhabditis elegans, and it was also successfully used to elucidate Fe³⁺ enrichment and exchange infected by innexin3 (Inx3) in hemichannel‐closed Sf9 cells.     

Capping nanoparticles with graphene quantum dots for enhanced thermoelectric performance

Graphene quantum dots (GQDs) are shown to serve as phase transfer agents to transfer various types of nanoparticles (NPs) from non-polar to polar solvents. Thorough characterization of the NPs proves complete native ligand exchange. Pellets of this GQD–NP composite show that the GQDs limit the crystal size during spark plasma sintering, yielding enhanced thermoelectric performance compared with NPs exchanged with inorganic ions. A photoluminescence study of the GQD–NP composite also suggests energy transfer from GQDs to NPs.     

A two‐dimensional layered CdII coordination polymer with a three‐dimensional supramolecular architecture incorporating mixed multidentate N‐ and O‐donor ligands

The combination of N‐heterocyclic and multicarboxylate ligands is a good choice for the construction of metal–organic frameworks. In the title coordination polymer, poly[bis{μ₂‐1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole‐κ²N³:N⁴}(μ₄‐butanedioato‐κ⁴O¹:O^1′:O⁴:O^4′)(μ₂‐butanedioato‐κ²O¹:O⁴)dicadmium], [Cd(C₄H₄O₄)(C₉H₈N₆)]_n, each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from three carboxylate groups of three succinate (butanedioate) ligands and two N atoms from two 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligands. Cd^II ions are connected by two kinds of crystallographically independent succinate ligands to generate a two‐dimensional layered structure with bimt ligands located on each side of the layer. Adjacent layers are further connected by hydrogen bonding, leading to a three‐dimensional supramolecular architecture in the solid state. Thermogravimetric analysis of the title polymer shows that it is stable up to 529 K and then loses weight from 529 to 918 K, corresponding to the decomposition of the bimt ligands and succinate groups. The polymer exhibits a strong fluorescence emission in the solid state at room temperature.     

Isothermal and nonisothermal crystallization kinetics of novel biobased poly(ethylene succinate-<Emphasis Type="Italic">co</Emphasis>-ethylene sebacate) copolymers from the amorphous state

In this work, the isothermal and nonisothermal crystallization kinetics of three novel biobased poly(ethylene succinate-co-ethylene sebacate) (PESSe) copolymers was systematically investigated with differential scanning calorimetry under different crystallization conditions from the amorphous state. For the isothermal cold crystallization kinetics study, the Avrami equation could well describe the crystallization process of PESSe at various crystallization temperatures. All three PESSe copolymers crystallized through the same crystallization mechanism; moreover, the overall isothermal cold crystallization rate of PESSe decreased with increasing ethylene sebacate (ESe) comonomer content. The nonisothermal cold crystallization kinetics of PESSe was also studied at different heating rates. With increasing ESe content or heating rate, the nonisothermal cold crystallization exotherm of PESSe copolymers shifted to high temperature range. Both the crystallization rate parameter and crystallization rate coefficient of PESSe copolymers decreased with increasing ESe content, indicating that PESSe copolymer with higher ESe content crystallized more slowly than that with lower ESe content. The Ozawa equation was used to analyze the nonisothermal cold crystallization kinetics of PESSe copolymers, which was found to fit the crystallization process very well.     

捕捉环加成反应中的有机亚铜中间体构筑氮杂环化合物研究进展

铜(I)盐催化的环加成反应,如叠氮-炔[3+2]环加成(Cu AAC)、不饱和化合物与异氰基化合物的[3+2]环加成、硝酮-炔的环加成(Kinugasa反应)是构建多类氮杂环的高效合成方法,被广泛应用于有机合成的各个领域.近年来,针对几类环加成反应中产生的有机亚铜中间体的多样性转化吸引了国内外很多课题组的注意,基于对这些环加成反应中有机亚铜中间体的捕捉,多类串联及多组分反应得以发展,从而成功实现了一系列多取代杂环或稠环结构的高效构建.本综述总结了这一领域的研究进展,按照所经历的有机亚铜中间体的类型进行分类,包括:(1)Cu AAC反应中产生的三氮唑亚铜中间体;(2)炔烃与异氰化合物[3+2]环加成反应中产生的2H-吡咯基亚铜中间体;(3) Kinugasa反应中产生的烯醇亚铜中间体.期望此综述能够有助于研究者了解有机亚铜中间体捕捉策略的发展、应用现状及不足之处,进一步推动铜催化转化的发展.     

Enhanced Four-Electron Oxygen Reduction Selectivity of Clamp-Shaped Cobalt(II) Porphyrin(2.1.2.1) Complexes

The molecular structure, electrochemistry, spectroelectrochemistry and electrocatalytic oxygen reduction reaction (ORR) features of two Co^II porphyrin(2.1.2.1) complexes bearing Ph or F₅Ph groups at the two meso-positions of the macrocycle are examined. Single crystal X-ray analysis reveal a highly bent, nonplanar macrocyclic conformation of the complex resulting in clamp-shaped molecular structures. Cyclic voltammetry paired with UV/Vis spectroelectrochemistry in PhCN/0.1 M TBAP suggest that the first electron addition corresponds to a macrocyclic-centered reduction while spectral changes observed during the first oxidation are consistent with a metal-centered Co^II/Co^III process. The activity of the clamp-shaped complexes towards heterogeneous ORR in 0.1 M KOH show selectivity towards the 4e⁻ ORR pathway giving H₂O. DFT first-principle calculations on the porphyrin catalyst indicates a lower overpotential for 4e⁻ ORR as compared to the 2e⁻ pathway, consistent with experimental data.     

Ru(bpy)32+-Enabled Cell-Surface Photocatalytic Proximity Labeling toward More Efficient Capture of Physically Interacting Cells

Intercellular proximity labeling has emerged as a promising approach to enable the study of cell-cell interactions (CCIs), but the efficiency of current platforms is limited. Here, we use Ru(bpy)₃²⁺ to construct an efficient photocatalytic proximity labeling (PPL) system on the cell surface that allows the highly discriminative CCI detection with spatiotemporal resolution. Through the mechanism study and quantitative characterization on living cells, we demonstrate that the singlet-oxygen (¹O₂) mechanism is more efficient and specific than the single electron transfer (SET) mechanism in Ru-mediated PPL. Ru(bpy)₃²⁺ catalysts with different cell-anchoring moieties are prepared to facilitate the catalyst loading on primary cells. Finally, based on this system, we develop a “live” T cell receptor (TCR) multimer with TCR-T cells that could sensitively identify and discriminate cells presenting antigens of different affinity, providing a powerful tool to better understand the heterogeneity of antigen presenting cells.